Executive recruitment company Monroe Consulting Group Indonesia is recruiting on behalf of a leading multinational company with a core focus on electrical products. As expansion continues, our client is seeking a professional with at least 10 years’ experience in Civil Design Engineer for the job of Lead Civil Engineer – Oil & Gas Projects. The job is based in Jakarta, Indonesia.Key job responsibilities include: Collecting inputs for project details (plot details, feeder arrangements etc.) from client & Project Engineering ManagerCollecting inputs for project details (General Arrangement Drawings) from VendorsPreparing civil & structural deliverables for the project scope.Submission of requirement of man-hours for undertaking & reviewing of design & drawings of the projectReviewing of BOQ and submission to contracts team and providing technical clarificationsReviewing of design & drawings, made by Design Engineers & Draftsman & checking of design & calculations and obtaining approvals from the clientCoordination with multiple disciplines for ensuring inter-departmental checksProviding support & clarifications to the Site Execution teamChecking of pre-award evaluation of vendors (w.r.t. technical specifications requirement of the client) and forwarding the validation document to Supply Chain ManagementClarification of conflict w.r.t. the design & requirements of the client to the Site Execution TeamJob Requirements:Bachelor’s degree or higher in Civil EngineeringMinimum of 10 years of Professional experience, out of which at least 3 to 5 years to be in LEAD PositionShould have done Design of RCC Buildings in Oil & Gas SectorExposure in the design of Blast Resistant RCC Buildings would be an advantageStrong knowledge in design of RCC Buildings in Oil & Gas SectorStrong knowledge in design of Blast resistant RCC Buildings (Single Storey & Two Storey)Strong knowledge in Dynamic Analysis Methods with Multiple Degree of Freedom (MDOF)Strong knowledge in Non-Linear Time History Analysis with material nonlinearity properties for the Dynamic analysisHands on experience on the use of ABAQUS / ANSYS / SAP2000 software for the dynamic analysis is preferredProficient in ETABS, SAFE, STAAD Pro, ABAQUS / ANSYS / SAP2000.Awareness in AUTOCAD, REVIT & TEKLA

Assist planning processes and forecasts in close coordination with other members of the FP&A team Understand & drive insights from the operating units and full company P&L Analyze financial results and communicate key messages to senior members of the FP&A team Analyze existing processes and identify process improvement opportunities and provide support as new processes are coordinated and put in place Ensure delivery of all financial data/reporting in a timely manner from the team members Ensure the control and the integrity of the data throughout the reporting production Other ad hoc analytical projects as needed Requirements Bachelor’s Degree in Finance and/or Accounting 2-4 years of relevant professional experience including finance and systems administration Detail-oriented and well organized with strong written and verbal communication Excellent working knowledge of MS Excel, PowerPoint and Word Experience with financial system transformation a plus Self-starter and team player, able to work independently and collaboratively with various teams in a deadline-focused environment

Siegwerk is one of the world’s leading suppliers of Printing Inks and sustainable packaging solutions. A career here will give you significant flexibility and support in a company focused on making a positive impact in the world. Siegwerk is poised to disrupt the global packaging industry; changing the way packaging is produced and consumed for the benefit of us all. At Siegwerk, you will have everything you need to help make that change. Join us, let’s Do it. With Heart. Your Tasks – What You can expect as Application Technology Executive :Product developmentIndustrialization processProduct cost saving developmentMaintaining Laboratory Equipment SLOB Reduction ProgramSupport Sales, Technology Development and SCM in delivering customer solutionConduct research and development programs align with the product and technology strategiesProviding technical advice and support project development with ink application Follow up feedback/update on new introduced product/developmentEnsure Ink Portal implementationSupport technical trial, trouble shooting, and discussion in customerEnsure all formulation are comply with end user regulationFollow HSE, 5S and Quality PolicyYour Profile – What do You bring as Application Technology Executive ? experience in printing inkexperience in printing processgood communication skillproject ownershipable to do proper project documentationable to operate SAP, ink portal

Description This role is responsible for supervising and maintaining the plants Quality systems to ensure compliance to regulatory, federal, and local laws. Areas of focus will include the identification and achievement of facility Quality KPI’s through appropriate corrective/preventive actions and continuous improvement initiatives.Essential Functions & Responsibilities Actively engaged support in planning, defining, and directing the site auditing control program to ensure compliance to all procedures, and policies, GMP standards, Kraft Heinz requirements, and regulatory, federal and local laws.Responsible for cheese formulations and upkeep of the formulation systems. Conduct plant formulation trials with RND.Monitors Ingredient specs to ensure up to date and accurate.Support the KHMS system and operational standards as outlined in the plant accountability list.Trains, mentors, and leads site QA and Production team to ensure program goals are met. Dedicated support to site QCMS/ISO Coordinator. Monitors and maintains plant QCMS/KHMS program by complying to current Kraft Heinz and International Audit (FSSC/ISO) standards. Facilitate and co-lead site cross functional QCMS/KHMS Team and participate with Kraft corporate to insure successful certification for site.Ensure all Specification/KPI/QCMS/KHMS/FSSC/ISO/ plans are maintained andSupport all internal and external inspections/regulatory visits. Support audit preparation activities, accompany inspector, and complete necessary reports and postings.Perform follow-ups to non-conformances found and provide responses as appropriate. Review and approve minor change requests.Responsible for Hold/Release documentation and dispositioning of products.Complete validation studies for all CCPs, OPRPs and other significant controls in accordance with approved methodologies.Ensures compliance to Golden Rules and other Quality principles through routine auditing, reporting and trending compliance appropriately.Provides expertise and actively participates in equipment commissioning and startup, ensuring standardization of all applicable quality and food safety procedures.Adhere to approved change control procedures, to include reviewing partial HACCP plans and issuing Agile change requests, as needed.Supports factory FSQ continuous improvement initiatives. Seeks out, identifies and implements projects to improve product quality and consistency, process capability, waste reduction, etc.Actively supports factory shop floor assessments (i.e., performance monitoring, GEMBA walks) to ensure quality & safety standards are adhered to at all times.Expected Experience & Required SkillsProven history of technical quality or production knowledge of policies & programs in Food or relevant manufacturing settings.Education or Operational/On the job knowledge of Food Science, Food Production, Manufacturing Quality/Operations, or other relevant environments.Strong leadership, technical, communication and interpersonal skills required along with attention to detail.Knowledge of quality or production systems, procedures, & policies. Manage multiple assignments, develop work plans, & prioritize.Knowledge of statistical processes.Planning and organizing skills.Successful candidates possess a positive focus toward solutions with emphasis on preventative pro-active measures and team building.Must be able to work scheduled and/or alternate shifts, weekends, and all required overtime. Prompt and regular attendance.Work Environment & ScheduleThis position is considered a Additionally, this role requires must be able to work shifts, weekends, and all required overtime as needed. Physical RequirementsPhysical demands include but not limited toOccasional – activity or conditions sustained for 1/3 of working hours; keyboard or text input, upright stance; Sedentary – occasionally exerting 0-10 bs of force, limited movement from workstation for brief periods of time.Location(s)New Ulm Plant

Description This role will be the Manufacturing IT lead for KraftHeinz responsible for the S/4 SAP deployment of manufacturing and quality management systems. KraftHeinz operates 70+ manufacturing facilities globally and maintains a portfolio of production planning and quality systems. This role will oversee KraftHeinz suite of Quality Management Systems such as: SAP PP, QM, iQS, LIMS. This position will work closely with all internal and external business partners to understand future-state strategies and provide key input for shaping systems designs.Primary Responsibilities Lead the workstream responsible for the design and deployment of all KraftHeinz quality management systems globally including ERP transition from SAP ECC to SAP S/4This workstream includes working with internal and external customers to capture business requirements and apply these requirements to systems design and implementation.Partnership with external contractors responsible for systems project management, implementation, and integrationProvide tactical guidance to program leads on the direction and design of manufacturing and quality systems globally, particularly in the SAP S/4 SpaceBe a key subject matter expert in solution shaping of systems enhancements.Provide tactical guidance all aspects of systems implementation such as: blueprinting, financial estimation and tracking, communication, development, testing, training, and hypercare support.Be the focal point for project issue identification and resolution for QMS.Work with program leads on the preparation of conversion plans identifying all necessary tasks, dependencies, responsible parties, and timeline for successful implementation.Communicate effectively to all interested parties throughout project lifecycle.QualificationsBachelor’s Degree (Information Technology, engineering related field preferred)5+ years’ experience in manufacturing, quality and/or production planning or information technology related fieldRelevant experience in a role on a software implementation project is advantageous.Relevant experience with SAP S/4 HANA very advantageous. Specifically, SAP suit of solutions: PP, QM, MMHigh standard of communication skills expected both oral and written.High standard of initiative and ability to work through issues expected.High standard of organization to plan and complete tasks in priority order expected.Expected travel approximately 30 – 40%Location(s)Guangzhou – Jinhui BuildingKraft Heinz is an Equal Opportunity Employer – Underrepresented Ethnic Minority Groups/Women/Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity and other protected classes.

Executive recruitment company Monroe Consulting Group Indonesia is recruiting on behalf of a leading multinational company with a core focus on manufacturing flexible packaging. As expansion continues, our client is seeking a professional with at least 20 years’ experience in engineering and management in a multinational company for the job of Senior Manager Operation. The job is based in Serang, Indonesia.Key job responsibilities include: Report directly to the Board of DirectorResponsible to all aspects of manufacturing operation to fulfil the demand of customer request. It includes both technical and non-technical matters in flexible packaging business.Lead the team (management and operations) in SerangManage together with management team all aspects of running the day-to-day, including product development, production planning and monitoring, maintenance, quality control, procurement & inventory management, and financeBuild coherent team with clear performance focus, a can-do attitude and positive cultureDevelop and implement operational improvements and best practice operating proceduresSupport product development and transition of new product into productionMonitor operations metrics to optimise product quality and minimise wasteJob Requirements:Master’s degree/Bachelor Degree in Engineering, or related field with at least 15 years’ experience in management and manufacturing20+ years’ experience in manufacturing, experience in flexible packaging is a recommendedStrong in technical, operation, and people managementEnglish language, international business experience highly desirableHigh accuracy of own workExperienced professional with an entrepreneurial character and a “hands-on approach”Experienced with the task of building a high-tech business in Indonesia’s rapidly developing marketTeam player, positive attitude, hands-on and high flexibility